Rabu, 19 Januari 2011

Reset Waste Ink Counter Epson C90

Posted by sense |

Epson C90..!!, this is a good printer, first use this printer I aspire after, but there insuffiency I which do not like, that is cartridge original epson c90 cannot be refill. Epson C90 use system durabrite.

Like case of epson printer other. In a moment this printer epson c90 printer will blinking or waste ink counter have full. And unhappily SSC Service utility ver 4.30 not support for epson C90 epson, it to be I use adjustment program for epson c90 or Resetter Epson C90. I use adjustment program indonesia version.

Let go Reset Epson c90 blinking :
  • Turn on your printer epson c90.( before running software resetter, printer have to be installed truly in the computer).
  • Now Download software adjustment program Epson C90 then Extrac the software and Go to extracded folder then Run AdjProg.exe file then click Accept button. (note : to run adjustment program epson c90 without error please change date setting in your computer to 11 July 2007. if you get error message when running this program please see under).
  • Click particular adjustment mode button. After clicked the button will show this menu.
  • Select waste ink pad counter then click ok or double click the item. Click initialization button. this process will reset counter value become zero. Then click ok again to confirmation this process

This Software Error.. ?

If you get error message when running software resetter for epson c90 and all file in the extrakded folder deleted automatically, don't panic. following this instructions :
  • Delete the folder in “C:\Adjustments_Programs\Stylus C90” on your Computer.
  • Open registry editor then Go to : HKEY_LOCAL_MACHINE | SOFTWARE | EPSON | PTSG | Stylus C90.
  • Delete registry key “Stylus C90” Then Reboot your PC.
  • Before re-run this program please change date setting in your computer to 11 July 2007
Download software resetter :

Download: softwre resetter for epson stylus C90 softwre resetter for epson stylus C90 (779.5 KiB)

Resetter the error 5200 canon ip2770

Posted by sense |

Here's How to Reset Canon IP2770 Error 5200:
  1. The printer is turned off and plugged the power cord.
  2. Press Resume button 2 seconds
  3. then press the POWER button until the green light on (when pressing the POWER button, Resume  button ... jgn released first)
  4. Then release the RESUME button, but do not release the POWER button.
  5. POWER button while still depressed, press the Resume button 5 times. Led will light turns green      orange with the last glow orange. (do not be mistaken 4x because the printer will die completely, but it is temporary too) Then ...
  6. Release both buttons simultaneously.
  7. Led will blink briefly and then will glow GREEN.
  8. And the computer will detect new hardware, just ignore ...
  9. Press the POWER button, then the printer will die.
  10. Press the POWER button again then the printer will flash and ... IP2770 Printer is ready for use.

Di klik Aja Broooooo